How to identify your UPVC Door Lock
Which Manufacturer?
Check the faceplate and gearbox on the locks for the manufacturer or the logo. If there is no logo stamped on the faceplate or gearbox, it is more than likely to be ABT, Millenco, and Weru or is an older version of Fullex or KFV. If you are unsure of the logo, send us a picture.
A. Backset?The backset is measured from the front of the faceplate to the centre of the Euro cylinder cut out. Select the backset size from the drop-down menu.
B. Centres (PZ)?The centres are measured from the centre of the spindle hole to the centre of the top part of the Euro cylinder cut out (the round part where the key goes in).
C,D,E,F. Locking Points?
Check what locking points are on the strip and the order that they are fixed to it, hooks, deadbolts, latch, mushrooms or pins etc.
Locking Point Distance, C, D, E, F?
Measure the distance between each of the locking points on the strip as follows:
- Measure the distance between the outer locking points (the two locking points furthest away from the centre case)
- Measure the distance between the inner locking points if there are any (the two locking points closest to the centre case)
With any locks that only have one locking point, only the distance between them is shown. Please note that the locking point distances can vary a few millimetres (mm) depending on whether the locking points are engaged or note.
Faceplate/Forend Width?Measure the width of the faceplate in millimetres (mm). Depending on the lock faceplates are normally available in 16mm, 20mm, 22mm or 24mm. You will also need to know if the faceplate has a flat, U-rail or rounded profile.
Lock Operation?There are four types of locking operations available as follows:
- Lift Lever, then locks with the key.
- Nightlatch Locking, just slams closed and it latches shut.
- Key Wind, just close the door and turn the key several times to deadlock bolts or mushrooms etc.
- Fastlocking (Europa Plus).
To Lock - Lift the handle upwards to engage the locking points then lock the system by turning the key anti clockwise
To Unlock - Turn the key clockwise and push the handle downwards to disengage the locking points
Nightlatch Locking
To Lock - Lift the handle upwards to engage the locking points then lock the system by turning the key anti clockwise
To Unlock - Turn the key clockwise, push the handle downwards to disengage the locking points and turn the key to withdraw the latch
Key Wind
To Lock - Latch engages automatically. Lock by turning the key anti-clockwise. Two rotations of the key will lock the locking points
To Unlock - Turn the key anticlockwise two rotations and this will unlock the locking points. A further half turn will withdraw the latch
Fastlocking (Europa Plus)
To Lock - Lift the handle upwards to engage the locking points. There is no need to turn the key
To Unlock - Turn the key clockwise and push the handle downwards to disengage the locking points. Return the key to withdraw the latch.
Please note that some multipoint locks and many lock keeps/strikes are handed. Winkhaus locks and keeps are handed differently to the rest of the range.





