LockMonster Mila Copy Latch Only Gearbox - L24745 - LockMonster.co.uk


LockMonster Mila Copy Latch Only Gearbox

Hover Over Picture with Mouse


Product Sku
a-L24745

Price

£43.08 (Including VAT)

LockMonster Mila Copy Latch Only Gearbox

Product code: a-L24745

The LockMonster Mila Copy Latch Only Gearbox has a 25mm or 35mm backset with 92mm centres. It is a single spindle latch only centre case with a 234mm case height and a 40mm or 50mm case width. Designed to suit old style Mila latch only cases, it offers a cost-effective solution for repairing or refurbishing existing door systems without the need to replace the entire strip. Please note the fixing points are unthreaded and require the use of self-tapping screws. Some older locks are fitted with an offset or cranked connector. This only affects gearbox replacements and not full-length locks, but it is an important factor to check before fitting. Replacement gearboxes are now supplied with inline connectors only. They remain compatible with older locks. However, the drive gear behind the faceplate will need adapting by modifying the square hole in the drive gear into a slot to ensure correct operation. HandingThe latch can be reversed by removing the screw in the side of the case, removing the latch, flipping it to the opposite hand, and then refitting the screw. OperationLocking Method – A: Lift the lever to engage the locking mechanisms, then turn the cylinder one full turn to lock. To unlock, turn the key one full turn and push the lever down. NotesThis unit is a copy of the original Mila centre case and is compatible with many UPVC door multipoint locking systems. Check all measurements carefully before installation to ensure correct fit.
25/92
Euro profile lock case
Latch Only
Centre Gearbox Only
Single spindle
Backset: 25mm
Case Height: 234mm
Case Width: 40mm
Centre Case: Latch Only
Centres: 92mm
Weight: 1Kg
Mechanism: Euro Cylinder
Spindle: Single
Manufacturer Reference: L24745
Feature 1: Euro profile lock case
Feature 2: Latch Only
Feature 3: Centre Gearbox Only
Feature 4: Single spindle
Categorisation: Multi Point Locks|Door|Centre Case|Gearbox|Mila
Backset: 25mm
Barcode: 5055120762623
Case Height: 234mm
Case Width: 40mm
Centre Case: Latch Only
Centres: 92mm
Weight: 1Kg
Mechanism: Euro Cylinder
Spindle: Single
Manufacturer Reference: L24745
Need Sales Advice?
Send us an email

Click here to send us an email. We aim to reply within an hour.

Call us

You can telephone us on 01202 798879 between 9:00am and 5:30pm, Monday to Friday.