KFV Stable Door Lock Latch Deadbolt 2 Pins Key Wind Operated Multipoint Door Lock - AS2300W20 - LockMonster.co.uk


KFV Stable Door Lock Latch Deadbolt 2 Pins Key Wind Operated Multipoint Door Lock

Hover Over Picture with Mouse


Product Sku
AS2300W20

Price

£283.92 (Including VAT)

KFV Stable Door Lock Latch Deadbolt 2 Pins Key Wind Operated Multipoint Door Lock

Product code: AS2300W20

KFV Stable Door multipoint door lock features 2 Pin Bolts, 2 Deadbolts & 1 Latch with 35mm backset.
This is a special KFV lock, specifically designed for use on stable doors, where each half of the door opens separately. The lock is supplied in two parts with 2 pins, one in the top section and one in the bottom. It features a 16mm faceplate and 35mm backset. Both the top and bottom sections are supplied.
To close and lock the door, first close the bottom section, then the top section, or both parts together. On turning the cylinder or thumbturn on the top and bottom part, the pins and deadbolts will engage (the operation is key wind).
To open the top section only, turn the cylinder or thumbturn on the top lock to disengage the pins and deadbolts. Then retract the latch by moving the handle, or by a further turn of the cylinder, that will release the latch.
To open both the top and bottom section, turn the cylinder or thumbturn on the bottom section first and then turn the cylinder on the top section to disengage the pins and deadbolts. The latch can then be retracted by the handle or a further turn of the cylinder to release the whole door.   
This unique stable door lock features 2 round pin bolts, one located on the top half, the other on the bottom half. It allows either the top or bottom parts of the door to be opened together or independently.
To close and lock the door, either the top part can be closed first, followed by the bottom part, or both parts can be closed together. Once closed, turn the thumbturn or euro key cylinder on the top and bottom parts. Shootbolts and deadbolts will engage on doing so and the door is fully locked.
To open the top door only, from either the inside or outside, first turn the thumbturn or cylinder key to disengage the deadbolt and shootbolrs. The latch can be retracted by the handle or cylinder to release the top door. To open both parts together, repeat these steps but unlock the cylinder on both the top and bottom parts to release the complete door.
We'd always recommend removing the multipoint from the door to help identify it and that is even more important for KFV. Early models feature a yellow passivated faceplate and dark grey gearboxes, whereas new models have shiny silver faceplates and light grey gearboxes. The best way to identify them is to match the measurements up with out line drawings.
When replacing old locks, keeps may need to be moved, or hook boxes repositioned. If there is limited clearance on the original routing, this may require a small amount of work to the door to enable the locks to fit.
KFV multipoint door lock gearboxes are single spindle and 92mm centres.
The overall height of the gearbox is 210mm, the bolt throws 21mm and the distance from the bottom of the latch to the top of the deadbolt is 56mm. The distance from the spindle to the top of the case is 85mm but the gearbox has both a hole and a groove to accept bolt through handle fixings.
Older KFV gearboxes are connected to the faceplate strip with 1/8" rivets.
When measuring the backset, allow 2-3mm for the faceplate, so a 35mm backset gearbox will measure 32mm when not fixed to the strip.
Operation: Key Wind
Need Sales Advice?
Send us an email

Click here to send us an email. We aim to reply within an hour.

Call us

You can telephone us on 01202 798879 between 9:00am and 5:30pm, Monday to Friday.