KFV Screw Fix Genuine Multipoint Gearbox - Lift Lever to lock - KFVCASE25NEW/30/35/40/45 - LockMonster.co.uk


KFV Screw Fix Genuine Multipoint Gearbox - Lift Lever to lock

Hover Over Picture with Mouse


Product Sku
KFVCASE25NEW/30/35/40/45

Price

£122.40 (Including VAT)

Customise this item
Size/Style *

KFV Screw Fix Genuine Multipoint Gearbox - Lift Lever to lock

Product code: KFVCASE25NEW/30/35/40/45

KFV Screw Fix Genuine Multipoint Gearbox - Lift Lever handle to lock.
Backset: 25mm, 30mm, 35mm, 40mm or 45mm 
Centres PZ: 92mm
Case Height: 210mm
Case Width: Backset + 18mm
Copy/Genuine: Genuine
Cylinder Type: Euro - not supplied
Handing: Not Handed
Main Gearbox: Latch & deadbolt
Spindle: Single 8mm
KFV cases are riveted onto strips and need to be drilled and then re-riveted.
These cases will only replace newer KFV locks as older versions have different connectors.
The overall height of the gearbox is 210mm, the bolt throws 21mm and the distance from the bottom of the latch to the top of the deadbolt is 56mm. The distance from the spindle to the top of the case is 85mm but the gearbox has both a hole and a groove to accept bolt-through handle fixings.
Older KFV gearboxes are connected to the faceplate strip with 1/8" rivets.
There are very few other gearboxes which are fitted in this way (Winkhaus being another example) which can help with identification. However, new KFV locks have gearboxes screwed to the faceplate.
KFV locks are available as either a lift lever or key wind variants. It's worth noting that it is not possible to swap a lift lever lock to a key wind gearbox or visa versa.
When measuring the backset, allow 2-3mm for the faceplate, so a 35mm backset gearbox will measure 32mm when not fixed to the strip.
Early KFV models had different rivet spacing and used different connectors when attaching the gearbox to the strip. That's not a problem when replacing the whole lock, but worth considering if only the gearbox needs replacing as the new gearbox will not replace very early models. Brand new locks have a gearbox that is attached to the faceplate with screws.
Product Accessories
KFV Screw Fix Genuine Multipoint Gearbox - Lift Lever to lock

KFV Lock case Only (rivet gearbox type) lift lever to lock

KFV Lockcase Gearbox Only. Centres: 92mm. Height:...

£122.40

Need Sales Advice?
Send us an email

Click here to send us an email. We aim to reply within an hour.

Call us

You can telephone us on 01202 798879 between 9:00am and 5:30pm, Monday to Friday.